Paper(95~99)

 1999

  • J. J. Morikuni, P. V. Mena, A. V. Harton, K. W. Wyatt, and S. M. Kang, “Modeling Diffusive Turn-Off Transients in Laser Diodes with Spatially Independent Rate Equations,” IEEE J. of Lightwave Technol., vol. 17, no. 1. pp. 95-102, January 1999.
  • H. Kutuk, I. C. Goknar, and S. M. Kang, “Interconnect Simulation in a Fast Timing Simulator ILLIADS-I,” IEEE Trans. on Circuits and Syst.-1, vol. 46, no. 1, pp. 178-189, January 1999.
  • S. M. Yoo and S. M. Kang, “No-Race Charge-Recycling Differential Logic (NCDL),” Proc. of IEEE Great Lakes VLSI Symp. (GLSVLSI’99), Ann Arbor, MI, February 1999, pp. 202-205.
  • C. W. Kim, S. M. Yoo, and S. M. Kang, “NMOS Energy Recovery Logic,” Proc. of IEEE Great Lakes VLSI Symp. (GLSVLSI’99), Ann Arbor, MI, February 1999, pp. 310-313.
  • I. C. Goknar, H. Kutuk, and S. M. Kang, “Moment Components Technique for Passive Reduced Order Models of RLCG Interconnects,” TAU Wkshp. – Timing Issues in the Specification and Synthesis of Digital Syst., Monterey, CA, March 1999, pp. 185-192.
  • K. W. Kim, T. T. Hwang, C. L. Liu, and S. M. Kang, “Logic Transformation for Low Power Synthesis,” 1999 Des. Automat. and Test in Europe (DATE) Conf., Munich, Germany, March 1999, pp. 158-162.
  • S. M. Yoo and S. M. Kang, “Improved Domino Structures Effective for High Performance Design,” Electron. Lett., vol. 35, no. 5, pp. 367-368, March 1999.
  • E. Conforti, A. C. Bordonalli, S. Ho, and S. M. Kang, “Optical 2R Remodulator using Feed-Forward Control of Semiconductor Optical Amplifier Gain,” Microwave and Optical Technol. Lett., vol. 21, no. 1, pp. 39-42, April 5, 1999.
  • D. Chen, E. Li, E. Rosenbaum, and S. M. Kang, “Interconnect Thermal Modeling for Determining Design Limits on Current Density,” Proc. of 1999 Int. Symp. on Phys. Des., Monterey, CA, April 12-14, 1999, pp. 172-178.
  • C.-H. Tsai and S.-M. Kang, “Standard Cell Placement for Even On-Chip Thermal Distribution,” Proc. of 1999 Int. Symp. on Phys. Des. (ISPD’99), Monterey, CA, April 12-14, 1999.
  • J. H. Chen, K. M. Coperich, S. M. Kang, and J. Schutt-Aine, “Parameter Extraction for a Microwave Micromachined Switch,” Second Int. Conf. on Modeling and Simulation of Microsyst. (MSM’99), San Juan, Puerto Rico, April 19-21, 1999, pp. 190-193.
  • S. M. Yoo and S. M. Kang, “CMOS Pass-Gate No-Race Charge Recycling Logic (CPCRL),” 1999 IEEE Int. Symp. on Circuits and Syst. (ISCAS’99),Orlando, FL, May 31, June 2, 1999, pp. 226-229.
  • J. H. Chen and S. M. Kang, “A Mixed Frequency-Time Approach for Quasi-Periodic Steady-State Simulation of Multi-Level Modeled Circuits,” 1999 IEEE Int. Symp. on Circuits and Syst. (ISCAS’99), Orlando, FL, May 31-June 2, 1999, pp. VI-194-197.
  • K.-W. Kim, S.-M. Yoo, H. H. Chao, S.-M. Kang, and C. L. Liu, “Low Power Logic Synthesis for a Finite-State Input Transition Power Dissipation Model,” Proc. of Int. Symp. on Circuits and Syst. (ISCAS’99), Orlando, FL, May 1999, pp. 111-114.
  • P. V. Mena, J. J. Morikuni, S. M. Kang, A. V. Harton, and K. W. Wyatt, “Rate Equation Based Model of VCSEL Thermal LI Characteristics,” IEEE J. of Lightwave Technol., vol. 17, no. 5, pp. 865-872, May 1999.
  • C. H. Tsai, E. Rosenbaum, and S. M. Kang, “Substrate Resistance Modeling and Circuit-Level Simulation of parasitic Device Coupling Effects for CMOS I/O Circuits under ESD Stress,” 1999IEEE/ACM Des. Automat. Conf., New Orleans, LA, June 21-25, 1999, pp. 549-554.
  • A. Hossain, S.-M. Kang, and R. Horst, “ServerNet and ATM Interconnects: Comparison for Compressed Video Transmission,” J. of Commun., vol. 1, no. 2, pp. 134-142, June 1999.
  • E. Conforti, S. H. Ho, A. C. Bordonalli, C. M. Gallep, J. P. B. Custodio, R. Simao, and S. M. Kang, “Optical Carrier Reuse with Gain Compression and Feed-Forward Optical Amplifiers,” Proc. of 1999 SBMO/IEEEMTT-S Int. Microwave and Optoelectronics Conf., Rio de Janeiro, Brazil, July 1999, pp. 381-385.
  • C. M. Gallep, E. Conforti, J. P. B. Custodio, A. C. Bordonalli, S. H. Ho, and S. M. Kang, “SOASim: A Simulator for Semiconductor Optical Amplifier with Gain Compression,” Proc. of 1999 SBMO/IEEE MTT-S Int. Microwave and Optoelectronics Conf., July 1999, pp. 386-390.
  • U. Ekambaram, S. M. Kang, and R. A. Saleh, “Behavioral Autonomous Steady-State Analysis using Broyden’s Method,” Midwest Symp. on Circuits and Syst., Las Cruces, NM, August 1999.
  • E. Conforti, A. C. Bordonalli, C. M. Gallep, J. P. B. Custodio, S. Ho, and S. M. Kang, “Extinction Ratio Improvement using Feedforward Control of Semiconductor Optical Amplifier Gain,” Proc. of XVII Brazilian Symp. on Telecommun., Rio de Janeiro, Brazil, August 9-12, 1999, pp. 156-158.
  • E. Conforti, C. M. Gallep, A. C. Bordonalli, J. P. B. Custodio, S. Ho, and S. M. Kang, “Optical Carrier Reuse with Gain Compression and Feedforward Semiconductor Optical Amplifiers,” 1999 IEEE MTT-S,AP-5, and LEOS Int. Microwave and Optoelectron. Conf., Rio de Janeiro, Brazil, August 9-12, 1999.
  • I. C. Goknar, H. Kutuk, and S. M. Kang, “Passive Model Order Reduction for RLCG Interconnects Via the Moment Matching Method,” European Conf. on Circuit Theory and Des. (ECCTD), Rome, Italy, August 29-September 2, 1999.
  • Y. K. Cheng and S. M. Kang, “An Efficient Method for Hot-Spot Identification in ULSI Circuits,” IEEE Int. Conf. on Comput.-Aided Des., San Jose, CA, November 7-11, 1999, pp. 124-127.
  • K. W. Kim, C. L. Liu, and S. M. Kang, “Implication Graph Based Domino Logic Synthesis,” IEEE Int. Conf. on Comput.-Aided Des., San Jose, CA, November 7-11, 1999, pp. 111-114.
  • P. V. Mena, J. J. Morikuni, S. M. Kang, A. V. Harton, and K. W. Wyatt, “A comprehensive circuit-level model of vertical-cavity surface-emitting lasers,” IEEE J. of Lightwave Technol., vol. 17, no. 2, pp. 2612-2632 December 1999.


1998

  • H. Duan, J. W. Lockwood, and S. M. Kang, “Matrix Unit Cell Scheduler (MUCS) for Input-Buffered Switches,” IEEE Commun. Lett., Vol. 2, no. 1, pp. 20-23, January 1998.
  • S. M. Yoo and S. M. Kang, “A Boot-Strapped NMOS Charge Recovery Logic,” IEEE Great Lakes Symp. on VLSI, Lafayette, LA, February 19-21, 1998, pp. 30-33.
  • L. P. Yuan, C. C. Teng, and S. M. Kang, “Statistical Estimation of Average Power Dissipation using Nonparametric Techniques,” IEEE Trans. on VLSI Syst., Vol. 6, no. 1, pp. 65-73, March 1998.
  • Y. Huh, M. G. Lee, J. S. Lee, H. C. Jung, T. Li, D. H. Song, Y. J. Lee, J. M. Hwang, Y. K. Sung, and S. M. Kang, “A Study of ESD-Induced Latent Damage in CMOS Integrated Circuits,” Int. Rel. Phys. Symp., Reno, NV, March 30-31, April 1-2, 1998, pp. 279-283.
  • W. C. Choi and S. M. Kang, “The Control of Bandwidth and Delay in Rate-Based Traffic Queueing,” U.S.-Korea Sci. and Technol. Symp., Chicago, IL, April 23-25, 1998.
  • S. Y. Park and S. M. Kang, “An Event-Driven Behavioral ATM Network Simulator,” U.S.-Korea Sci. and Technol. Symp., Chicago, IL, April 23-25, 1998.
  • J. W. Stroming, Y. Kang, S. M. Kang, andT. S. Huang, “New Architectures for M4R Shape Coding,” IEEE Trans. Circuits and Syst., Part II, Vol. 45, no. 5, pp. 556-562, May 1998.
  • T. Li, P. Bendix, D. Suh, Y. J. Huh, E. Rosenbaum, A. Kapoor, and S. M. Kang, “Optimum Design for a Two-Stage CMOS I/O ESD Protection Circuit,” IEEE Int. Symp. on Circuits and Syst., Monterey, CA, May 1998, pp. 113-116.
  • T. Li, C. H. Tsai, E. Rosenbaum, and S. M. Kang, “Modeling, Extraction and Simulation of CMOS I/O Circuits under ESD Stress,” IEEE Int. Symp. on Circuits and Syst., Monterey, CA, May 1998, pp. 389-392.
  • J. W. Lockwood, S. M. Kang, A. Hossain, J. Hiltenbrant, “Providing Multicast Video on Demand using Native-mode Asynchronous Transfer Mode,” IEEE Int. Symp. on Circuits and Syst., Monterey, CA, May 1998.
  • T. Li and S. M. Kang, “Layout Extraction and Verification Methodology for CMOS I/O Circuits,” IEEE/ACM Des. Automat. Conf., San Francisco, CA, June 15-19, 1998, pp. 291-296.
  • Y. Huh, Y. Sung, and S. M. Kang, “A Study of Hot-Carrier-Induced Mismatch Drift: A Reliability Issue for VLSI Circuits,” IEEE J. of Solid-State Circuits, Vol. 33, no. 6, pp. 921-927, June 1998.
  • Y.-K. Cheng, P. Raha, C.-C. Teng, E. Rosenbaum, and S. M. Kang, “ILLIADS-T: An Electrothermal Timing Simulator for Temperature-Sensitive Reliability Diagnosis of CMOS VLSI Chips,” IEEE Trans. on Comput.-Aided Des., Vol. 17, no 8, pp. 668-681, August 1998.
  • T. Li, C.-H. Tsai, E. Rosenbaum, and S.-M. Kang, “Substrate Resistance Modeling and Circuit-Level Simulation of Parasitic Device Coupling Effects for CMOS I/O Circuits under ESD Stress,” Proc. 1998 EOS/ESD Symp., Reno, NV, October 4-8, 1998, pp. 281-289.
  • T. Li, C.-H. Tsai, and S.-M. Kang, “Efficient Transient Electrothermal Simulation of CMOS VLSI Circuits under Electrical Overstress,” IEEE Int. Conf. on Comput.-Aided Des. (ICCAD’98), San Jose, CA, November 1998, pp. 6-11.
  • M. Bossardt, S. Y. Park, J. W. Lockwood, S. M. Kang, and S. Y. Park, “Available Bit Rate Architecture and Simulation for an Input-Buffered and Per-VC Queued ATM Switch,” IEEE Global Telecommun. Conf. (Globecom’98), Sydney, Australia, November 1998, pp. 1817-1822.
  • L. P. Yuan and S. M. Kang, “Average ower Analysis of Sequential Circuits using an Autoregressive Model,” Circuits Syst. and Signal Processing, Birkhauser, Vol. 17, no. 2, pp. 289-304, 1998.
  • H. Kutuk and S. M. Kang, “A Switched Capacitor Approach to Field-Programmable Analog Array (FPAA) Design,” Analog Integrated Circuits and Signal Processing, Vol. 17, pp. 51-65, 1998.


1997

  • T. Li, D. Suh, S. Ramaswamy, P. Bendix, E. Rosenbaum, A. Kapoor, and S. M. Kang, “Study of a CMOS I/O Protection Circuit using Circuit-Level Simulation, ” 1997 Int. Rel. Phys. Symp., Denver, CO, April 7-10, 1997, pp. 333-338.
  • P. Mena, S. M. Kang, and T. A. DeTemple, “Rate-Equation-Based Laser Models with a Single Solution Regime,” IEEE J. of Lightwave Tech., Vol. 15, no. 4, pp. 717-730, April 1997.
  • H. Duan, J. W. Lockwood, S. M. Kang, and J. D. Will, “A High-Performance OC-12/OC-48 Queue Design Prototype for Input-Buffered ATM Switches,” IEEE Infocom 97, Kobe, Japan, April 7-11, 1997, pp. 20-28.
  • T. Li, S. Ramaswamy, E. Rosenbaum, and S. M. Kang, “Circuit-Level Simulation and Layout Optimization for Deep Submicron EOS/ESD Output Protection Device,” IEEE Custom Integrated Circuits Conf., Santa Clara, CA, May 5-8, 1997, pp. 159-162.
  • B. Whitlock, P. K. Pepeljugoski, D. M. Kuchta, J. D. Crow, and S. M. Kang, “Computer Modeling and Simulation of the Optoelectronic Technology Consortium (OETC) Optical Bus,” IEEE J. on Selected Areas in Commun., Vol. 15, no. 4, pp. 6-18, May 1997.
  • S. Y. Park, B. Vaduvur, and S. M. Kang, “Data Link Level Support for Handoff in ATM Network,” 1997 Int. Conf. on Commun., Montreal, Canada, June 8-12, 1997.
  • J. W. Stroming, Y. Kang, T. S. Huang, and S. M. Kang, “New Architectures for Modified MMR Shape Coding,” 1997 IEEE Int. Symp. on Circuits and Syst., Hong Kong, June 9-12, 1997, pp. 1205-1208.
  • S. M. Kang, H. Duan, J. W. Lockwood, and J. D. Will, “iiQueue, a QoS-Oriented Queue Module for Input-Buffered ATM Switches,” 1997 IEEE Int. Symp. on Circuits and Syst., Hong Kong, June 9-12, 1997, pp. 2144-2147.
  • L. P. Yuan, C. C. Teng, and S. M. Kang, “Statistical Estimation of Average Power Dissipation in Sequential Circuits,” ACM/IEEE Des. Automat. Conf., Anaheim, CA, June 9-13, 1997, pp. 377-382.
  • J. W. Kim and S. M. Kang, “An Efficient Transistor Folding Algorithm for Row-Based CMOS Layout Design,” ACM/IEEE Des. Automat. Conf., Anaheim, CA, June 9-13, pp. 456-459, 1997.
  • L. P. Yuan and S. M. Kang, “A Sequential Procedure for Average Power Analysis of Sequential Circuits,” ACM/IEEE Int. Symp. on Low Power Electronics and Des., Monterey, CA, August 18-20, 1997, pp. 231-234.
  • C.-C. Teng, Y.-K. Cheng, E. Rosenbaum, and S. M. Kang, “iTEM: A Temperature-Dependent Electromigration Reliability Diagnosis Tool,” IEEE Trans. on Comput.-Aided Des. of Integrated Circuits and Syst., Vol. 16, no. 8, pp. 882-894, August, 1997.
  • T. Li, C. H. Tsai, Y. J. Huh, E. Rosenbaum, and S. M. Kang, “A New Algorithm for Circuit-Level Electrothermal Simulation under EOS/ESD Stress,” IEEE Int. Integrated Rel. Wkshp., Lake Tahoe, NV, October 1997, pp. 130-131.
  • M. G. Lee, Y. J. Huh, M. C. Jung, T. Li, J. S. Lee, D. H. Song, Y. J. Lee, J. M. Hwang, and S. M. Kang, “Circuit-Level Simulation for Failure Analysis of Advanced CMOS ESD Protection Structures,” IEEE Int. Conf. on VLSI and CAD, Seoul, Korea, October 1997, pp. 585-587.
  • T. Li, Y. J. Huh, and S. M. Kang, “Automated Extraction of Parasitic BJTs for CMOS I/O Circuits under ESD Stress,” IEEE Int. Integrated Rel. Wkshp., Lake Tahoe, NV, October 1997, pp. 103-109.
  • H. Kutuk and S. M. Kang, “Filter Design using a New Field-Programmable Analog Array (FPAA),” Analog Integrated Circuits and Signal Processing, Vol. 14, pp.81-90, 1997.
  • A. Hossain, S. M. Kang, and R. Horst, “Performance Comparison of Video Transport over ATM and ServerNet interconnects,” Proc. of IEEE Conf. on Multimedia Comput. and Syst. (ICMCS’97), Ottawa, Ontario, Canada, June 3-6, 1997.


1996

  • K. Nahrstedt, A. Hossain, and S. M. Kang, “A Probe-Based Algorithm for QoS Specification and Adaptation,” Fourth Int. IFIP Wkshp. on Quality of Service, Paris, France, March 6-8, 1996.
  • C. C. Teng, Y. K. Cheng, E. Rosenbaum, and S. M. Kang, “iTEM: A Chip-Level Electromigration Reliability Diagnosis Tool using Electrothermal Timing Simulation,” 1996 Int. Rel. Phys. Symp., Dallas, TX, April 30-May 2, 1996, pp. 172-179.
  • Y.-K. Cheng, E. Rosenbaum, and S.-M. Kang, “ETS-A: A New Electrothermal Simulator for CMOS VLSI Circuits,” Proc. of The European Des. and Test Conf. (EDAC-ETC), Paris, France, March 11-14, 1996, pp. 566-570.
  • J. W. Lockwood, S. M. Kang, S. G. Bishop, H. Duan, and A. Hossain, “Development of the iPOINT Testbed for Optoelectronic Asynchronous Transfer Mode Networking,” Proc. of 1996 Int. Conf. on Information Infrastructure (Information Superhighway), Beijing, P.R. China, April 25-28, 1996, pp. 509-513.
  • Y. K. Cheng and S. M. Kang, “Fast Thermal Analysis for CMOS VLSIC Reliability,” IEEE Custom Integrated Circuit Conf., San Diego, CA, May 5-8, 1996, pp. 479-482.
  • L.-P. Yuan, C.-C. Teng, and S. M. Kang, “Nonparametric Estimation of Average Power Dissipation in CMOS VLSI Circuits,” IEEE Custom Integrated Circuits Conf., San Diego, CA, May 5-8, 1996, pp. 225-228.
  • A. Xiang, W. Wohlmuth, P. Fay, S. M. Kang and I. Adesida, “Modelling of InGaAs MSM Photodetector for Circuit-Level Simulation,” IEEE J. of Lightwave Technol., Vol. 14, no. 5, pp. 716-723, May 1996.
  • H. Kutuk and S. M. Kang, “A Field-Programmable Analog Array (FPAA) using Switched-Capacitor Techniques,” IEEE Int. Symp. on Circuits and Syst., Vol. 4, Atlanta, GA, May 12-15 1996, pp. 41-44.
  • Y.-K. Cheng, E. Rosenbaum, and S. M. Kang, “Improvement on Chip-Level Electrothermal Simulator – ILLIADS-T,” IEEE Int. Symp. on Circuits and Syst., Atlanta, GA, May 1996, pp. 432-435.
  • Y.-K. Cheng, C.-C. Teng, A. Dharchoudhury, E. Rosenbaum, and S. M. Kang, “A Chip-Level Electrothermal Simulator for Temperature Profile Estimation of CMOS VLSI Chips,” Proc. of IEEE Int. Symp. on Circuits and Syst., Atlanta, GA, Vol. 4, May 1996, pp. 580-583.
  • A. M. Hill, C.-C. Teng, and S. M. Kang, “Statistical Results for Simulation-Based Maximum Power Estimation,” IEEE Int. Symp. on Circuits and Syst., 1996, Atlanta, GA, Vol. 4, May 12-15, 1996, pp. 13-16.
  • A. M. Hill and S. M. Kang, “Determining Accuracy Bounds for Simulation-Based Switching Activity Evaluation,” IEEE Trans. on Comput.-Aided Des., Vol. 15, no. 6, pp. 611-618, June 1996.
  • C. C. Teng, Y. K. Cheng, E. Rosenbaum, and S. M. Kang, “Hierarchical Electromigration Reliability Diagnosis for VLSI Interconnects,” 1996 ACM/IEEE Des. Automat. Conf., Las Vegas, NV, June 3-6, 1996, pp. 752-757.
  • Y.-K. Cheng, C. C. Teng, A. Dharchoudhury, E. Rosenbaum, and S. M. Kang, “iCET-28: A Complete Chip-Level Thermal Reliability Diagnosis Tool for CMOS VLSI Chips,” 1996 ACM IEEE Des. Automat. Conf., Las Vegas, NV, June 3-7, 1996, pp. 548-551.
  • L. P. Yuan, C. C. Teng, and S. M. Kang, “Statistical Estimation of Average Power Dissipation in CMOS VLSI Circuits using Nonparametric Techniques,” ACM/IEEE Int.Symp. on Low Power Electronics and Des., Monterey, CA, August, 1996, pp. 73-78.
  • J. Kim and S. M. Kang, “A New Triple-Layer OTC Channel Router,” IEEE Trans. on Comput.-Aided Des., Vol. 15, no. 9, pp. 1059-1070, September 1996.
  • S. Ramaswamy, E. Li, E. Rosenbaum, and S. M. Kang, “Circuit-Level Simulation of CDM-ESD and EOS in Submicron MOS Devices,” 1996 EOS/ESD Symp., Orlando, FL, September 10-12, 1996, pp. 316-321.
  • T. Li, S. Ramaswamy, and S. M. Kang, “EOS/ESD Protection Circuit Layout Extraction and Simulation,” SRC Techcon 96, Phoenix, AZ, September 12-14, 1996, p. 111.
  • E. Chang and S. M. Kang, “Transient Simulation of Lossy Coupled Transmission Lines using Interative Linear Least Square Fitting and Piecewise Recursive Convolution,” IEEE Trans. on Circuits and Syst., Part I, Vol. 43, no. 11, pp. 923-932, November 1996.


1995

  • E. C. Chang and S. M. Kang, “Efficient Modeling and Simulation of Coupled Transmission Lines,” 1995 IEEE Multichip Module Conf., Santa Cruz, CA, January 1995, pp. 152-157.
  • P. V. Mena, R. M. Lammert, S. M. Kang, and J. J. Coleman, “Demonstration of a Free-Space Optical Interconnect in a CMOS Chip,” Optoelectronic Interconnects II, SPIE Proc., Vol. 2400, no. 16, February 8-9, 1995, pp. 115-125.
  • R. M. Lammert, P. V. Mena, D. V. Forbes, M. L. Osowski, S. M. Kang, and J. J. Coleman, “Strained-Layer in GaAs-AlGaAs Lasers with Monolithically Integrated Photodiodes by Selective-Area MOCVD,” IEEE Photonics Tech. Lett., Vol. 7, no. 3, pp. 247-250, March 1995.
  • D. H. Cho, S. M. Kang, K.-H. Kim, and S.-H. Lee, “An Accurate Intrinsic Capacitance Modeling for Deep Submicron MOSFETs,” IEEE Trans. on Electron Devices, Vol. 42, no. 3, pp. 540-548, March 1995.
  • W. Sun, E. Rosenbaum, and S. M. Kang, “Fast Timing Simulation for Submicron Hot-Carrier Degradation,” 1995 Int. Rel. Phys. Symp., Las Vegas, NV, April 1995, pp. 65-71.
  • S. Ramaswamy, C. Duvvury, and S. M. Kang, “EOS/ESD Reliability of Deep Submicron nMOS Protection Devices,” 1995 Int. Rel. Phys. Symp., Las Vegas, NV, April 1995, pp. 284-291.
  • A. Dharchoudhury and S. M. Kang, “Worst-Case Analysis and Optimization of VLSI Circuit Performances,” IEEE Trans. on Comput.-Aided Des., Vol. 14, no. 4, pp. 481-492, April 1995.
  • A. M. Hill and S. M. Kang, “Determining Accuracy Bounds for Simulation-Based Switching Activity Estimation,” 1995 Int. Symp. on Low-Power Des. (ISLPD), Dana Point, CA, April 1995, pp. 215-220.
  • B. K. Whitlock, J. J. Morikuni, E. Conforti, and S. M. Kang, “Simulating Optical Interconnects,” IEEE Circuit and Devices, Vol. 11, no. 3, pp. 12-18, May 1995.
  • Y.-K. Cheng and S.-M. Kang, “Chip-Level Thermal Simulator to Predict VLSI Chip Temperature,” 1995 IEEE Int. Symp. on Circuits and Syst., Seattle, WA, May 1995, pp. 1392-1395.
  • J. W. Kim and S. M. Kang, “An Efficient Contact Placement for Custom Cell Layout Synthesis,” 1995 IEEE Custom Integrated Circuits Conf., Santa Clara, CA, May 1995, pp. 275-278.
  • T. Karnik, C. C. Teng, and S. M. Kang, “High-Level Hot Carrier Reliability-Driven Synthesis using Macromodels,” 1995 IEEE Custom Integrated Circuits Conf., Santa Clara, CA, May 1995, pp. 65-68.
  • A. M. Hill and S. M. Kang, “Accuracy Bounds in Switching Activity Estimation,” 1995 Custom Integrated Circuits Conf., Santa Clara, CA, May 1995, pp. 73-76.
  • E. J. Brauer and S. M. Kang, “An Analytical Method to Calculate Emitter Follower Delay using Trial Functions in Coupled Node Equations,” 1995 IEEE Int. Symp. on Circuits and Syst., Seattle, WA, May 1995, pp. 1580-1583.
  • M. Cynn and S. M. Kang, “Incremental Node Extraction Algorithms for Incremental Layout System,” 1995 IEEE Int. Symp. on Circuits and Syst., Seattle, WA, May 1995, pp. 1691-1694.
  • J. W. Lockwood, H. Duan, J. J. Morikuni, S. M. Kang, S. Akkineni, and R. H. Campbell, “Scalable Optoelectronic ATM Networks: The iPOINT Fully Functional Testbed,” IEEE J. of Lightwave Technol., Vol. 13, no. 6, pp. 1093-1103, June 1995.
  • J. H. Kim, D. Y. Han, M. H. Nam, and S. M. Kang, “Analysis of Three-Layered Piezoelectric Ceramic Transformer Filter,” IEEE Trans. on Circuits and Syst., Part I, Vol. 42, no. 6, pp. 307-313, June 1995.
  • E. Conforti, B. K. Whitlock, J. J. Morikuni, and S. M. Kang, “Issues in the Modeling of Fiber Optic Systems,” Proc. 1995 SBMO/IEEE MTT-S Int. Microwave and Optoelectronics Conf., Vol. 1, Rio de Janeiro, Brazil, July 25, 1995, pp. 175-182.
  • M. Sriram and S. M. Kang, “Efficient Approximation of the Time-Domain Response of Lossy Coupled Transmission Line Trees,” IEEE Trans. on Comput.-Aided Des. of Integrated Circuits and Syst., Vol. 14, no. 8, pp. 1013-1024, August 1995.
  • B. K. Whitlock, E. Conforti, and S. M. Kang, “High-Level Software for Simulation of Fiber Optic Links,” Proc. Brazilian 13th Telecommun. Soc. Conf., Vol. 1, Aguas de Lindoia, Brazil, September 4, 1995, pp. 103-108.
  • S. Ramaswamy, P. Raha, E. Rosenbaum, and S. M. Kang, “EOS/ESD Protection Circuit Design for Deep Submicron SOI Technology,” 1995 EOS/ESD Symp., Phoenix, AZ, September 1995, pp. 212-217.
  • S. A. Javro and S. M. Kang, “Transforming Tucker’s Linearized Laser Rate Equations to a Form that has a Single Solution Regime,” IEEE J. Lightwave Tech., Vol. 13, no. 9, pp. 1899-1904, September 1995.
  • H. Duan, J. W. Lockwood, and S. M. Kang, “An Efficient Input Queuing and Cell Scheduling Scheme for Scalable Ultra-Broadband Optoelectronic ATM Switching,” SPIE Proc. Photonics East ’95 Conf., Vol. 2608, Philadelphia, PA, October 24-26, 1995, pp. 107-108.
  • S. Ho and S. M. Kang, “Selective Switching – An Enabling Technology for High-Performance ATM Switch Fabric,” SPIE Proc. Photonics East ’95 Conf., Vol. 2608, Philadelphia, PA, October 24-26, 1995, pp. 178-189.
  • A. Hossain and S. M. Kang, “Fuzzy Logic Based Cell Scheduling for Input-Buffered ATM Switches,” SPIE Proc. Photonics East ’95 Conf., Vol. 2608, Philadelphia, PA, October 24-26, 1995, pp. 117-121.
  • P. K. Pepeljugoski, B. K. Whitlock, D. M. Kuchta, J. D. Crow, and S. M. Kang, “Modeling and Simulation of the OETC Optical Bus,” in IEEE LEOS ’95 Conf. Proc., Vol. 1, San Francisco, CA, October 31, 1995, pp. 185-186.
  • T. Karnik and S. M. Kang, “An Empirical Model for Accurate Estimation of Routing Delay in FPGAs,” 1995 IEEE Int. Conf. on Comput.-Aided Des., San Jose, CA, November 1995, pp. 328-331.
  • J. W. Kim and S. M. Kang, “A Timing-Driven Datapath Synthesis with Integer Programming,” 1995 IEEE Int. Conf. on Comput.-Aided Des, San Jose, CA, November 1995, pp. 716-719.
  • E. Brauer and S. M. Kang, “An Algorithm for Functional Verification of Digital ECL Circuits,” IEEE Trans. on Comput.-Aided Des., Vol. 14, no. 12, 1546-1556, December 1995.